Ask for offer

Fluoropolymer Coating Systems PTFE


PTFE is the most common fluoropolymers used in different industries for a wide range of applications, especially in critical applications in which chemical resistance, low friction and high temperatures resistance are mandatory.

Compared to other fluoropolymers, PTFE is not melt processable.

Normal PTFE is not appropriate for:

  • Blow molding,
  • Vacuum forming (except Moldflon) or
  • Injection molding.

Ask for offer

Fluoropolymer Coating Systems PTFE


  • PTFE is usually used in the Oil&Gas/Petrochemical, Semi-conductor, Medical industry, Aerospace, Packing&Food industry, Pharmaceuticals and other demanding industries.

Key Properties

  • Excellent chemical resistance
  • Working temperature -190°C to +260°C
  • Greatest resistance to fatigue (Wöhler curve)
  • Food contact compliance Water contact approval
  • Flame resistant - UL94V0
  • Non-stick properties
  • Low coefficient of friction
  • UV-resistant (does not age)
  • Not hygroscopic (water absorption <0,01%)
  • Very good dielectric insulation properties